Features
The CM-1250B-3 and CM-1250B-4S have the following features:
- Corrosion-resistant brass construction
- Flows up to 1250 gpm with minimum friction loss
- Grease fittings at each swivel joint
- Full 3 in. (76mm) waterway
- 2-1/2 in. MNST outlet
- Stainless steel ball bearings at each swivel joint
- 360 degree rotation w/positive lock
- Vanes at each elbow to reduce friction loss, improving range of stream
- Optional inlet flanges 3 in. or 4 in. flange
The CM-2000B and CM-2000H have the following features:
- Corrosion-resistant brass construction
- Flows up to 2000 gpm with minimum friction loss
- Grease fittings at each swivel joint
- Full 4 in. (100 mm) waterway
- Stainless steel ball bearings at each swivel joint
- 360 degree rotation w/positive lock
- Vanes at each elbow to reduce friction loss, improving range of stream
- 4 in. inlet flange and 3 1/2 in. MNST outlet
Applications
- Suitable for use with water or all types of foam concentrates
- Suitable for Marine, Offshore, Industrial, or other corrosive environment
| Part No. |
Waterway in. (mm) |
Inlet |
Discharge |
Material |
Vertical Travel |
Horizontal Rotation |
| CM-1250B-3 |
3 (76) |
3 in. Flange |
2.5 in. MNST |
Brass |
150° |
360° |
| CM-1250B4S |
3 (76) |
4 in. Flange |
2.5 in. MNST |
Brass |
150° |
360° |
| CM-2000B |
4 (100) |
4 in. Flange |
3.5 in. MNST |
Brass |
150° |
360° |
| CM-2000H |
4 (100) |
4 in. Flange |
3.5 in. MNST |
Brass |
150° |
360° |
Note: The converted values in this document are provided for dimensional reference only and do not reflect an actual measurement.
CHEMGUARD® and the product names listed in this material are marks and/ or registered marks. Unauthorized use is strictly prohibited.