Chemguard
204 South Sixth Avenue, Mansfield, TX   76063
Phone: 1-817-473-9964
Toll Free: 1-800-222-3710
Fax: 1-817-473-0606
E-mail: info@chemguard.com
Web: www.chemguard.com

Product Name: P40 Series Foam Concentrate Pump

Chemguard foam concentrate pumps are constructed of corrosion resistant brass and stainless steel, and are designed for use with all types of fire fighting foam concentrates.

The pumps are Listed by Underwriters Laboratories as meeting the stringent requirements of “UL 448C, the Standard for Stationary, Rotary-Type, Positive-Displacement Pumps for Fire Protection Service”, and Factory Mutual Listed class 1313 and are furnished complete with pressure relief valves which also meet the requirements of these standards.

Features

  • Single shaft seal as opposed to dual.
  • Internal rotary gear pump
  • Fewer moving parts reduces maintenance & wear.
  • Integral relief valve port on all pump sizes to simplify installations allowing return to tank operation capability.
  • Shaft lip seal is mounted in removable gland for ease of replacement without major pump disassembly.
  • Electric motor and diesel engine drives available.
  • UL and FM tested for liquids ranging from water up to 4600 cps.
  • No special material changes for using fluoroprotein concentrates.
  • Pump shafts are supported by multiple Carbon-Graphite and/or Graphaloy bushings eliminating the possibility that failure of one ball bearing will result in complete pump failure.
  • To meet UL & FM Listings, pumps must be shipped to include drive motor (electric or diesel), listed controller and PRV along with certificates of flow and pressure testing.

Ordering Information

Model No. Description

CGP40-24

0.1 to 17 gpm   (0.4 to 64 L/min)

CGP40-30

4.7 to 27 gpm   (18 to 102 L/min)

CGP40-40

5.4 to 34 gpm   (19 to 129 L/min)

Downloads

Specifications

Product NameP40 Series Foam Concentrate Pump
Product #CGP40

Options

Product #ManufacturerDescription
511
 

Features

  • UL Tested to the latest UL 448C standard for positive displacement pumps
  • FM Approved per class 1313 & 1359
  • Bronze construction viton seats
  • Factory set pressure @ 10% above pump’s maximum design pressure
  • Reseat pressure at 90% of set pressure
  • Leak free at 85% of set pressure
  • Factory set, labeled, and tested
  • No field adjustment allowed
  • Discharge must be piped back to foam concentrate tank using same pipe size as outlet or greater with no shut off valves in discharge line.

Chemguard can supply the pump, controller and PRV assembly as required by UL & FM as being listed or the complete skid assembly that will include all integral piping for ILBP or Balanced pressure system.


Accessories

-- None --