Precision Foam Test Kit

Printable Page

Description

The Chemguard Precision Foam Solution Test Kit is a complete testing system, designed to assist the fire protection professional in determining the proportioning accuracy of mobile foam equipment and apparatus, fixed foam systems, and portable foam equipment. This kit contains everything normally needed, except for the foam to determine if foam solution discharged from a system or apparatus is mixed or proportioned as recommended by the foam concentrate manufacturer. The test kit utilizes conductivity, a measurement of the ability of liquids to conduct electricity, to determine the amount of foam concentrate in foam solutions.

Conductivity is the method adopted by most foam concentrate manufacturers and many foam equipment listing and approval agencies to determine the accuracy of foam proportioning equipment. Although not as costly as some digital conductivity meters alone, this kit is adequate to determine proportioning accuracy for most fire service applications. The Chemguard Precision Foam Test Kit takes all the guesswork out of the foam system testing with accuracy only achievable with a digital conductivity meter and a digital scale.

Single custom fitted carrying case, including:

One (1) 250 gram capacity digital scale
One (1) digital conductivity meter
Eight (8) 125 ml sample beakers
One (1) 100 ml graduated cylinder
One (1) 250 ml wash bottle
Two (2) 500 ml sample bottles with caps
Two (2) 250 ml sample bottles with caps
Four (4) 125 ml sample bottles with caps
Two (2) 10 ml syringes
Two (2) 16-inch long sample pipettes
Six (6) 5-inch long sample pipettes
One (1) pad of 25 conductivity charts
One (1) Flexible straight edge rule
One (1) 100 gram calibration weight
One (1) calibration screwdriver
One (1) conductivity calibration solution
One (1) operation and instruction manual

Part No: Width Length Height Weight
EF10995 15.5”(39.4cm) 23.3”(59.2cm) 5.0”(12.7cm) 8 lbs.(3.64 kg)
EF11006 Precision Foam Solution Instructions
Downloads